Product details
Gruenberg designs and manufactures a complete line of standard and custom top-loading ovens to accommodate a variety of thermal processing applications. Top-loading ovens are designed to reach temperatures of 1000°F. The custom top-loading ovens simulate the down-hole thermal conditions in oil and gas drilling operations. The ovens can be used to calibrate electronic logging instruments and for drilling equipment burn-in. The ovens feature heavy duty dollies and can be used right at the drill site.
Oven temperatures reach a maximum of 1000°F and accommodate various capacities ranging from 4.6 to 27 cubic feet. The ovens load from the top to allow heavy equipment to be loaded into the test chamber by crane.
Key Specifications
- Chamber Size: 27 cubic feet
- Temperature Range: 150°F above ambient to 500°F
Gruenberg designs and manufactures a complete line of standard and custom top-loading ovens to accommodate a variety of thermal processing applications. Top-loading ovens are designed to reach temperatures of 1000°F. The custom top-loading ovens simulate the down-hole thermal conditions in oil and gas drilling operations. The ovens can be used to calibrate electronic logging instruments and for drilling equipment burn-in. The ovens feature heavy duty dollies and can be used right at the drill site.
Oven temperatures reach a maximum of 1000°F and accommodate various capacities ranging from 4.6 to 27 cubic feet. The ovens load from the top to allow heavy equipment to be loaded into the test chamber by crane.
Key Specifications
- Chamber Size: 27 cubic feet
- Temperature Range: 150°F above ambient to 500°F
- “L” lid design
- 500° F Max Temperature
- Heavy-duty, fully-welded structural steel frame
- Incoloy sheathed, seamless tubular heaters
- Heavy duty casters with swivel and brake
- High capacity horizontal airflow system
- Centrifugal type blower wheel
- Differential air pressure switch
- All Gruenberg Silver Select Top Loading Ovens for Oil and Gas Applications are factory tested to maximum temperature prior to shipment of equipment
Mechanical Equipment
Standard
- 4” thick Insulation, 3” thick on ends
- 18 gauge Aluminized Steel Interior
- 18 gauge CRS Exterior
- Painted Blue
- Structural Steel Frame
- Modular Design, 12' Long Modules
- Removable End Panels
- Semi-Pierced Diffuser Walls
- Two Direct Drive Circulation Packages
- Natural Intake with adjustable damper
- Natural Exhaust w/ adjustable damper
- Horizontal Airflow
- Uniformity: +/- 10°F of set-point
- “L” Shaped Lid, Rear Hinged
- Counter-weighted Manual Hinged Lid
- Casters for easy relocation of oven
- Approx. Shipping Weight: 3200 Lbs.
- Equipment Manual
Electrical Equipment
Standard
- NEMA 1 Control Box, Front Mounted
- Electric Heat
- 480V, 3Ph, 60Hz, 56 FLA, 42.8 kW
- Power Cord, 12 ft long
- Air Flow switch
- Sheathed Heaters, Incoloy
- SCR Protection
- Lighted Power Off/On Switch
- Lighted Heat Off/On Switch
- Communication Port, RS-232
- Ideal for drill bit calibration or well logging vessels in oil and gas applications
- Standard and custom options available to accommodate a variety of applications
- High capacity airflow system provides maximum temperature uniformity