Gruenberg News

Gruenberg, a leading industrial oven and sterilizer manufacturer, announced the shipment of three (3) multi truck Steri-Dry™ vivarium sterilizers to a university for lab animal cage sterilization. A factory cage sterility verification was performed on each unit prior to shipment. These Steri-Dry™ units will be placed side by side in the customer’s facility and a multiple unit start-up interlock feature was included. This feature prevents simultaneous start-ups which could create a power requirement that exceeds the total customer specified limitation. The sterilizers are also designed for pass through operation with multiple load/unload configurations. This type of design provides ease of

Gruenberg, a leading industrial oven and sterilizer manufacturer, announced the shipment of a Cyclone Series ™ safety oven for use in a Class 10,000 cleanroom. This cabinet oven is designed to remove large amounts of solvent from a product load. It has an operating temperature of 60ºC to 80ºC and interior chamber dimensions of 30” W x 30” D x 30” H. The oven features an intrinsically safe design to eliminate ignition sources with spark resistant fans and blowers along with an airtight continuously welded stainless steel interior to prevent the exchange of dust and/or vapors. The safety oven utilizes

Thermal Product Solutions, a global manufacturer of thermal-processing equipment, announced the shipment of a Gruenberg conveyor oven to the medical industry. This curing conveyor oven has a maximum temperature rating of 360ºF and an operating temperature range of 300ºF and 330ºF. The interior chamber is constructed with aluminized steel and has dimensions of 22” W x 66” L x 16” H. A heat resistant nylon conveyor belt transports product through the oven and the conveyor system includes a variable frequency drive for speed adjustments to meet processing requirements. The oven utilizes a high volume 800 CFM vertical down airflow system

Thermal Product Solutions, a global manufacturer of thermal processing equipment, announced the shipment of a Gruenberg Class A, XP Cabinet Oven to the defense industry. This oven will be used for drying plastic explosives at 120°F to 190°F. The product may be treated with various solvents. The maximum temperature of this oven is 200°F and has interior dimensions of 60” W x 36” D x 48” H. A temperature uniformity of +/-5°F was proven at a test temperature of 200°F. The cabinet oven has 3” thick mineral wool insulation within the stainless-steel floor, walls, and ceiling. The exterior is cold-rolled

Thermal Product Solutions, a global manufacturer of thermal processing equipment, announced the shipment of a Custom Gruenberg Tunnel Isolator Dryer to the medical industry. The operating temperature of this dryer is between 15°C and 28°C. The typical operating temperature is 20°C and the maximum temperature of the dryer is 43°C. It has been designed to replicate humidity conditions of 5% humidity. It has interior dimensions of 34” W x 91” D x 23” H. The dryer has a stainless-steel floor and conveyor, and the walls and ceiling are Lexan. All seams are RTV-sealed and drying is accomplished through the use

Thermal Product Solutions, a global manufacturer of thermal-processing equipment, announced the shipment of a Gruenberg cabinet oven to the aerospace industry. The operating temperature of this oven is between 200ºF and 550ºF. It has a maximum temperature of 550ºF and meets the ISO class 7 cleanliness standard. Using HEPA filters to maintain air cleanliness, this Gruenberg cabinet oven will be manufactured silicon-free. It will utilize Viton door gaskets, non-silicone HEPA filter gaskets and media, caulking, and gasket sheets instead of standard silicone material. This oven meets the Aerospace Material Specification 2750 (AMS2750) standards for pyrometry. In other words, it is

Thermal Product Solutions, a global manufacturer of thermal-processing equipment, announced the shipment of a Gruenberg Truck-in Oven to the manufacturing industry. The operating temperature of this oven is between 80ºC and 180ºC. It has a maximum temperature of 180ºC and has chamber dimensions of 48” W x 48” D x 72” H. The oven has 4” thick mineral wool insulation within the stainless-steel floor, walls, and ceiling. This Gruenberg Truck-in Oven has a horizontal process air circulation system that ensures uniform heat distribution throughout the oven chamber. “This truck-in oven complies with NFPA 86 Class A Low-Oxygen Ovens. There are

Thermal Product Solutions, a global manufacturer of thermal processing equipment, announced the shipment of a Gruenberg Lab Oven Sterilizer to the medical industry. The operating temperature of this oven is between 110ºC and 115ºC. It has a maximum temperature of 120ºC and has chamber dimensions of 36” W x 24” D x 36” H. The oven has 4” thick mineral wool insulation on its ceiling and 3” mineral wool insulation on the walls and bottom. This Gruenberg Lab Oven Sterilizer has a high volume 1,500 CFM horizontal airflow system installed. The oven is equipped to maintain a temperature uniformity of